Bring it over, I'll weld it up for you, have done a few......
Heat it and clean it, rinse and repeat (until no oil appears). Tig with the softer of the two common rods, I don't remember the number.....
Oh, and grind it back a bit to give some space to fill with weld.....
I know
Absolutely of no help,
I have some 4943 if you want to give it a try. I haven't tried welding any castings. You must have to do that rinse repeat cycle a few times. My Comet cylinder muff is like an oilite bushing.
Last edited: