HB: Handlebars Vincent handlebars

[stu spalding]

Does anyone know where I can get a Vincent flat bar, 24" long, 10.5" between bend centres in stainless. All the ones advertised as Vincent/Norton turn out to be Norton. Cheers, Stu.

 

[vibrac]

I suppose the certain place is the spares company when 10% and free postage is taken into account black or chrome

 

[stu spalding]

I suppose the certain place is the spares company when 10% and free postage is taken into account black or chrome

But not stainless. Thanks anyway, Stu.

 

[Robert Watson]

If you want to drop over I can bend you up a set.... I even have the proper dimension written down somewhere...

 

[chankly bore]

I believe the proper dimensions are 9'' centre, 8" either end at 165degrees, total 25", but Stu. wants sumfink else, innit?

 

[stu spalding]

I believe the proper dimensions are 9'' centre, 8" either end at 165degrees, total 25", but Stu. wants sumfink else, innit?

Thanks for the dimensions but what are you smoking? (and can I have some?) Stu.

 

[stu spalding]

If you want to drop over I can bend you up a set.... I even have the proper dimension written down somewhere...

Thanks for that Robert. I've got oxy/propane so if all else fails I'll bend 'em myself. Cheers Stu.

 

[chankly bore]

Thanks for the dimensions but what are you smoking? (and can I have some?) Stu.

It is called Astroturf, bleedin''ard to light, mate!

 

[Robert Watson]

Thanks for that Robert. I've got oxy/propane so if all else fails I'll bend 'em myself. Cheers Stu.

I made some dies for the press, so do them cold.

 

[van drenth]

Does anyone know where I can get a Vincent flat bar, 24" long, 10.5" between bend centres in stainless. All the ones advertised as Vincent/Norton turn out to be Norton. Cheers, Stu.

easy to make your self from SS pipe,