When using the double friction disc on Girdraulics, is the center tab on FF42/2 supposed to fit between the two tabs on the FF24/1?
Review from one very satisfied Vincent rider, I purchased one of Norman's kits, it literally fell on in minutes, the existing holes in the FF2 were perfectly aligned with the damper stroke arm bracket, I had to tap a thread in the underside of the headstock, but managed to do this with the correct size tap using a small open ended spanner on the square drive of the tap, and using plenty of tapping grease, whilst dreading the tap snapping in half (it didn't), spacer washers were supplied, but not required, the original damper knob is still in situ and screwed up tight, it does in fact serve a necessary function as a third fixing for the stroke arm bracket. A really great addition to any Vincent, and all for £100.00, an absolute bargain.Or for £100 plus postage you can get a full hydraulic damper kit to fit the standard front end from me.