I've just made a pair of those little FT235 washers that nestle inside the RHS friction discs.
Dimensions: OD = 7/8ths inch, ID = 1/2 inch - and thickness = 48thou (1.22mm).
My question is, should they be thicker than this to do their job?
Does anyone happen to have an original one in a box that they can measure please?
Peter B
Dimensions: OD = 7/8ths inch, ID = 1/2 inch - and thickness = 48thou (1.22mm).
My question is, should they be thicker than this to do their job?
Does anyone happen to have an original one in a box that they can measure please?
Peter B