T: Fuel Tank New Project

erik

Well Known and Active Forum User
VOC Member
IMG_5335.JPG
 

Pushrod Twin

Well Known and Active Forum User
VOC Member
Nice wheels. I suggest to bin that bottom yoke, purchase, or make, the modified one with the pivot point moved back.
The chain case will repair pretty easily, make a piece to fill the gap, keep the weld to a minimum.
 

Bill Thomas

Well Known and Active Forum User
VOC Member
Just a thought Eric, If that's one of the thick felts on the Fork Stem, We think it's a bit on the thick side,
We fitted one some time ago, And found it made it hard to set the bearings right,
It made the steering a bit stiff, After a few miles we then found the steering bearings were too loose !.
I now cut them in half, Same with the old type wheel bearing felts,
Just my thoughts, Good Luck, Bill.
 
Top